
The PPI 50 101 series high-pressure water jet pump from PHENIX TECHNOLOGIE, with a maximum pressure of 4200 bars,
ensures high-precision cutting while maintaining minimal pressure fluctuation, significantly improving the quality of the cut parts.
- – Servo control, with 15-20% reduced energy consumption compared to three-phase AC motors.
- – Fully operated via a touchscreen, with multifunctional display screens for alerts and monitoring of pressure, temperature, low water pressure, leakage points, etc., ensuring safe and reliable system operation.
- – The servo motor and constant flow hydraulic pump are used as power units, with intelligent control, high efficiency, and energy savings.
- – Pressure fluctuation is less than 5%, significantly enhancing the cutting quality of the workpieces.
- – Mainstream G9A-03 and G12 superchargers are adopted, equipped with external oil seals and high-precision cylinder systems. The optional G12 supercharger provides a higher flow rate.
FEATURES
An energy-efficient, effective, and intelligent choice.
hydraulic overflow is minimal with low heat emission, and the energy consumption of the cooling circuit is reduced.
| Maximum output flow | Maximum orifice size | Maximum pressure | Engine power | Dimensions |
 | 3,7 L/min | 0,35 mm | 4130 bars | 37 kW | 18S0x1167x1382mm |
 | 4,5 L/min | 0,38 mm | 4130 bars | 45 kW | 18S0x1167x1382mm |