This range of plasma generators is the most famous in metal industry, due to the cutting quality of the parts, almost without slag, few clearance and diameter holes equivalent to the sheet thickness (turntable 12 mm = diameter 12 mm).
They are generators cutting with Oxygen, Nitrogen, Argon,… but that have a low gas consumption.
Maintenance is very low and the consumables lifetime is longer in comparison to other generators ranges (semi-HD type and standard).
Possibility to cut up to 80mm thickness in steel,… and up to 160mm for stainless steel.
Cutting process with water spraying allowing to obtain a better cutting quality on stainless steel and aluminium.
| Mild steel | Stainless steel | Aluminium | Dimensions / weight | ||
| HPR 130XD
|
Without slag: Production (drilling):Maximum cutting capacity: |
16 mm 32 mm 38 mm |
x 20 mm 25 mm |
x 20 mm 25 mm |
H: 97cm L: 57cm P: 108cm 317.5kg |
| HPR 260XD
|
Without slag: Production (drilling):Maximum cutting capacity: |
32 mm 38 mm 64 mm |
x 32 mm 50 mm |
x 32 mm 50 mm |
H: 115cm L: 82cm P: 119cm 567kg |
| HPR 400XD
|
Without slag: Production (drilling):Maximum drilling capacity:Maximum cutting capacity: |
38 mm 50 mm x 80 mm |
x 45 mm 75 mm 80 mm |
x 38 mm x 80 mm |
H: 118cm L: 88cm P: 126cm 851kg |
| HPR 800XD
|
Without slag: Production (drilling):Maximum drilling capacity:Maximum cutting capacity:Rough cutting: |
38 mm 50 mm x 80 mm |
x 75 mm 100 mm 160 mm |
x 75 mm x 160 mm |
H: 170.2cm L: 87.6cm P: 137.2cm 851kg |
